www.rfm.com e-mail: info@rfm.com page 1 of 4 ?2008 by rf monolithics, inc. SF1111A - 7/17/08 electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 160.000 mhz passband insertion loss at fc il 911.0db 1.5 db passband bw 1.5 1, 2 590 khz 3 db passband bw 3 750 amplitude ripple over fc 470 khz 0.7 1.0 db phase linearity over fc 590 khz 10 20 deg p-p rejection fc-10.0 to fc-1.25 and fc+1.25 to fc+10.0 mhz 1, 2, 3 40 db fc-20 to fc-10.0 and fc+10.0 to fc+20 mhz 50 operating temperature range t a 1-20 +70 c smp-97 ? designed for cdma2000 bts applications simple external impedance matching hermetic smp-97 surface-mount case unbalanced input and output complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - max. soldering profile 260c for 30 s 160 mhz saw filter SF1111A 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is dependent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototypes." 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. connection terminals port 1 hot 10 port 1 gnd return 1 port 2 hot 5 port 2 gnd return 6 case ground all others electrical connections impedance matching to 50 ? unbalanced external l-c case style smp-97 24.6 x 9 mm nominal footprint lid symbolization (yy = year, ww = week) rfm SF1111A yyww pb caution: electrostatic sensitive device. observe precautions for handling. notes:
www.rfm.com e-mail: info@rfm.com page 2 of 4 ?2008 by rf monolithics, inc. SF1111A - 7/17/08 ch1 s11 1 u fs centr 160 . 000 mhz span 2 . 000 mhz cor prm ch2 s21 log 10 db/ ref -20 db center 160 . 000 000 mhz span 10 . 000 000 mhz cor prm ch3 s22 1 u fs centr 160 . 000 mhz span 2 . 000 mhz cor 7 dec 2007 13:40:32 1 1 : 52 . 115 -12 . 555 79 . 231 pf 160 . 000 000 mhz 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz ref=1 ch2 markers bw : 1 . 433757 mhz cent : 160 . 034548 mhz q: 111 . 62 1_ loss : -9 . 3580 db 1 1 : 45 . 631 0 . 7227 718 . 84 ph 160 . 000 000 mhz SF1111A demo # 3 full 2 ports cal. full resp
www.rfm.com e-mail: info@rfm.com page 3 of 4 ?2008 by rf monolithics, inc. SF1111A - 7/17/08 ch1 s21 del 700 ns/ ref 3 us cor smo prm ch2 s21 log 1 db/ ref -8 db ch2 center 160 . 000 000 mhz span 2 . 000 000 mhz cor prm 7 dec 2007 13:40:04 1 2 2 : -275 . 54 ns 1 . 180 000 mhz ref=1 ch1 markers mean : 3 . 4409 us s . dev : 63 . 113 ns p-p : 276 . 79 ns 1 2 2 : - . 03910 db . 940 000 mhz ref=1 ch2 markers mean : -9 . 4556 db s . dev : . 19950 db p-p : . 72290 db SF1111A demo # 3 thru cal. resp resp
www.rfm.com e-mail: info@rfm.com page 4 of 4 ?2008 by rf monolithics, inc. SF1111A - 7/17/08 materials solder pad termination au plating 30 - 60 uinches (76.2-152 um) over 80-200 uinches (203-508 um) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phos- phorus) 100-200 uinches thick body al 2 o 3 ceramic pb free case dimensions electrical connections dimension mm inches min nom max min nom max a 24.41 24.64 24.94 0.961 0.970 0.982 b 8.80 8.99 9.30 0.349 0.354 0.366 c 1.75 2.00 0.069 0.079 d 2.29 0.090 e 1.02 0.040 h 1.0 0.039 m 4.83 0.190 n 3.40 0.134 p 1.905 0.075 connection terminals port 1 input or return 10 return or input 1 port 2 output or return 5 return or output 6 ground all others single ended operation return is ground differential operation return is hot 10-terminal ceramic surface-mount case 24.6 x 9 mm nominal footprint smp-97 case a b c h d p (8 places) e (10 places) 56 4 3 2 1 7 8 9 10 m n 5 4 3 2 1 6 7 8 9 10 top view b ottom view
|
